LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2008 >> Forester XT, Automatic >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transmission (4AT) >> Reduction Drive Gear >> Assembly

Reduction Drive Gear: Assembly

  1. Press-fit the reduction drive gear to shaft.
  2. Press-fit the new ball bearing into reduction drive gear.
  3. Apply vaseline to the outer surface of the seal ring and shaft groove.
  4. Apply ATF to the new seal ring and install the seal ring.
    Fig 1: Identifying Seal Ring And Reduction Drive Gear
    G05657718Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals