LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2008 >> Forester XT, Automatic >> Repair and Diagnosis >> Suspension >> Wheel Alignment >> Front Suspension System >> Front Transverse Link >> Assembly >> Rear Bushing

Rear Bushing

  1. Install the rear bushing to transverse link and align aligning marks scribed on the two.
  2. Tighten a new self-locking nut.
    NOTE: While holding the rear bushing so as not to change position of aligning marks, tighten the self-locking nut.

    Tightening torque: 

    190 N.m (19.4 kgf-m, 140 ft-lb) 

scientia non olet · About LEMON Manuals