LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2008 >> Forester XT, Automatic >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 11 (Clutch System) >> Master Cylinder >> Disassembly

Master Cylinder: Disassembly

WARNING: This page is about a different variant/trim than selected.
  1. Remove the straight pin and reservoir tank.
    Fig 1: Identifying Straight Pin And Reservoir Tank
    G05327215Courtesy of SUBARU OF AMERICA, INC.
  2. Remove the oil seal.
    Fig 2: Identifying Oil Seal And Master Cylinder
    G05327216Courtesy of SUBARU OF AMERICA, INC.
  3. Move the cylinder boot towards the rear.
    Fig 3: Identifying Cylinder Boot
    G05327217Courtesy of SUBARU OF AMERICA, INC.
  4. Remove the snap ring.
    CAUTION: Be careful when removing the snap ring to prevent the rod, washer, piston and return spring from flying out.
scientia non olet · About LEMON Manuals