LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2008 >> Forester XT, Automatic >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 11 (Clutch System) >> Clutch Fluid >> Replacement

Clutch Fluid: Replacement

WARNING: This page is about a different variant/trim than selected.
CAUTION:
  • Use new SUBARU genuine brake fluid.
  • Cover the bleeder with cloth to prevent brake fluid from being splashed on surrounding parts when loosening the bleeder.
  • Avoid mixing different brands of brake fluid to prevent the quality of fluid from degrading.
  • Be careful not to allow dirt or dust to get into the reservoir tank.
NOTE:
  • During bleeding operation, keep the clutch reservoir tank filled with brake fluid to prevent entry of air.
  • Clutch pedal must be operated very slowly.
  • Bleed air from the oil line with help of a co-worker.
  • The amount of brake fluid required is approximately 70 m l  (2.4 US fl. oz., 2.5 Imp fl. oz) for total clutch system.
  1. Remove the air intake chamber. (Non-turbo model) <Ref. to REMOVAL , Air Intake Chamber. >
  2. Remove the intercooler. (Turbo model) <Ref. to REMOVAL , Intercooler. >
  3. Drain the brake fluid from the reservoir tank.
  4. Refill the reservoir tank with recommended brake fluid.

    Recommended brake fluid: 

    FMVSS No. 116, new DOT3 or DOT4 brake fluid 

  5. Drain all contaminated fluid using the same method as for air bleeding.
    NOTE: Keep the clutch reservoir tank filled with brake fluid to prevent entry of air.
scientia non olet · About LEMON Manuals