LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2008 >> Forester XT, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 1 (Mechanism & Function -- Automatic Transmission (5AT)) >> Transmission Control Module (TCM) >> Shift Pattern Selection >> 2nd HOLD CONTROL (IN MANUAL MODE)

2nd HOLD CONTROL (IN MANUAL MODE)

WARNING: This page is about a different car, the 2008 Subaru Tribeca, 2008 Subaru Outback, and 2008 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.

When the "+" switch is operated when the vehicle is in manual mode and not moving, the transmission shifts to 2nd speed enabling start in 2nd. This status is held unless the manual mode is canceled, or a speed other than 2nd is selected with the "-" switch. Also, the transmission is held in 2nd when the vehicle is stopped.

scientia non olet · About LEMON Manuals