LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2008 >> Forester X L.L. Bean Edition >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - Engine (Diagnostics) (H4SO) >> System Operation Check Mode >> Operation >> Idle Speed Control

Idle Speed Control

CAUTION: After executing the operation check mode, perform the Clear Memory Mode < Ref. to OPERATION , Clear Memory Mode>.
  1. On the « System operation check mode » display screen, select the {Idle Speed Control}.
  2. On the « Start the Engine » display screen, start the engine and click the [OK] button.
  3. In the « Idle Engine Speed Control » screen, click the ↑ button or the ↓ button to change the setting values, then click the [OK] button.

    Setting is possible in a range between 500 rpm - 2,000 rpm, in increments of 50 rpm. However, the engine speed that can actually be controlled will vary depending on the vehicle.

  4. Click the [Cancel] button to end the idle speed control. The screen will return to the « System Operation Check Mode » screen.
    NOTE: For detailed operation procedure, refer to the "PC application help for Subaru Select Monitor".
scientia non olet · About LEMON Manuals