LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2007 >> Outback i, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 40 (Automatic Transmission 5AT) >> Turbine Speed Sensor 1 >> Installation

Turbine Speed Sensor 1: Installation

WARNING: This page is about a different car, the 2006 Subaru Outback and 2006 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the turbine speed sensor 1.

    Tightening torque: 

    7 N.m (0.7 kgf-m, 5.2 ft-lb) 

  2. Connect the turbine speed sensor 1 connector.
    Fig 1: Identifying Connector From Turbine Speed Sensor
    G05022250
  3. Install the intercooler. (Turbo model)< Ref. to INSTALLATION , Intercooler. >
  4. Install the air intake chamber. (Non-turbo model) < Ref. to INSTALLATION , Air Intake Chamber. >
scientia non olet · About LEMON Manuals