LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2007 >> Outback i, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 40 (Automatic Transmission 5AT) >> Reduction Driven Gear >> Installation

Reduction Driven Gear: Installation

WARNING: This page is about a different car, the 2006 Subaru Outback and 2006 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.
  1. Set the range select lever to the "P" range.
  2. Use a plastic hammer to install reduction driven gear assembly.
  3. Select the reduction gear shims. < Ref. to ADJUSTMENT , Reduction Driven Gear. >
  4. Join the transmission case and the extension case, and then install the rear vehicle speed sensor. < Ref. to INSTALLATION , Extension Case. >
  5. Install the transmission assembly to the vehicle. < Ref. to INSTALLATION , Automatic Transmission Assembly. >
scientia non olet · About LEMON Manuals