LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2007 >> Outback i, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 40 (Automatic Transmission 5AT) >> Reduction Driven Gear >> Assembly

Reduction Driven Gear: Assembly

WARNING: This page is about a different car, the 2006 Subaru Outback and 2006 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.
  1. Using the ST, install the parking gear.

    ST 499755602 PRESS

    Fig 1: Identifying Parking Gear
    G05022313
  2. Install the snap ring.
    Fig 2: Identifying Snap Ring
    G05022311
  3. Install the new ball bearing to reduction driven gear using press.

    ST 18654AA000 INSTALLER

    Fig 3: Identifying Ball Bearing To Reduction Driven Gear
    G05022315
  4. Install the ball bearing on the reverse side with the same procedure as step  3).

    ST 18654AA000 INSTALLER

    Fig 4: Identifying Ball Bearing On Reverse Side
    G05022316
scientia non olet · About LEMON Manuals