LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2007 >> Outback i, Standard >> Repair and Diagnosis >> Engine Performance >> Ignition System >> Ignition System (H4SO) >> Ignition Coil and Ignitor Assembly >> Removal

Ignition Coil and Ignitor Assembly: Removal

  1. Disconnect the ground cable from the battery.
    Fig 1: Disconnecting Ground Cable
    G05019586Courtesy of SUBARU OF AMERICA, INC.
  2. Disconnect the spark plug cords from ignition coil and ignitor assembly.
    Fig 2: Locating Spark Plug Cords
    G05339696Courtesy of SUBARU OF AMERICA, INC.
  3. Disconnect the connector from the ignition coil & ignitor assembly.
  4. Remove the bolt which secures the ignition coil and ignitor assembly to the intake manifold.
    Fig 3: Identifying Ignition Coil Bolt
    G05339697Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals