Engine Oil: Replacement

Set the vehicle on a lift.
Open the engine oil filler cap for quick draining of engine oil.
Lift up the vehicle.
Drain engine oil by loosening the engine oil drain plug.
NOTE: Prepare the container for draining of engine oil.

Fig 1: Identifying Engine Oil Drain Plug
Courtesy of SUBARU OF AMERICA, INC.
Tighten the engine oil drain plug after draining engine oil.
NOTE: Use a new drain plug gasket.

Tightening torque:

44 N.m (4.5 kgf-m, 32.5 ft-lb)

Fig 2: Identifying Engine Oil Drain Plug
Courtesy of SUBARU OF AMERICA, INC.
Using engine oil of proper quality and viscosity, fill engine oil through the filler duct to the upper level on level gauge. Make sure that the vehicle is parked on a level surface when checking oil level.
Recommended oil:

Refer to "SPECIFICATION" for the recommended oil. <Ref. to SPECIFICATION .>

Engine oil capacity:

Refer to "SPECIFICATION" for the recommended oil. <Ref. to SPECIFICATION .>
Close the engine oil filler cap.
Start the engine and warm it up for a time.
After the engine stops, recheck the oil level. If necessary, add engine oil up to the upper level on level gauge.

Fig 3: Identifying Engine Oil Filler Cap And Level Gauge
Courtesy of SUBARU OF AMERICA, INC.