LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2007 >> Outback i, Automatic >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transmission (Diagnostics) (4AT) >> Subaru Select Monitor >> Operation >> Clear Memory Mode

Clear Memory Mode

  1. On the «Main Menu» display screen, select the {Each System Check}.
  2. On the «System Selection Menu» display screen, select the {Transmission}.
  3. Select the [OK] after the information of transmission type is displayed.
  4. On the «Transmission Diagnosis» display screen, select the {Clear Memory}.
    NOTE: If {Clear Memory 2} is selected and performed, DTC and learned control memory are cleared. If Clear Memory 2 is performed, execute the advance operation of learning control. <Ref. to FACILITATION OF LEARNING CONTROL , OPERATION, Subaru Select Monitor .>
scientia non olet · About LEMON Manuals