LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2007 >> Outback i, Automatic >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transmission (4AT) >> Reduction Driven Gear >> Assembly

Reduction Driven Gear: Assembly

  1. Install the snap ring to reduction driven gear.
  2. Install the new ball bearing to reduction driven gear using press.
    Fig 1: Identifying Snap Ring
    G05021916Courtesy of SUBARU OF AMERICA, INC.
  3. Install the snap ring to reduction driven gear.
    Fig 2: Identifying Snap Ring
    G05021917Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals