LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2007 >> Outback i, Automatic >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transmission (4AT) >> Parking Pawl >> Installation

Parking Pawl: Installation

  1. Install the parking pawl, return spring and shaft.
    Fig 1: Identifying Parking Pawl, Return Spring And Shaft
    G05021925Courtesy of SUBARU OF AMERICA, INC.
  2. Install the reduction drive gear. < Ref. to INSTALLATION , Reduction Drive Gear. >
  3. Install the rear vehicle speed sensor and extension case. < Ref. to INSTALLATION , Extension Case. >
  4. Install the transmission assembly to the vehicle. < Ref. to INSTALLATION , Automatic Transmission Assembly. >
scientia non olet · About LEMON Manuals