Propeller Shaft: Installation

Insert the sleeve yoke into the transmission and attach center bearing to body.
Tightening torque:

52 N.m (5.3kgf-m, 38.3 ft-lb)

Fig 1: Attaching Center Bearing To Body
Courtesy of SUBARU OF AMERICA, INC.
Align the alignment marks and connect the flange yoke and rear differential.
Tightening torque:

31 N.m (3.2 kgf-m, 23.1 ft-lb)

Fig 2: Identifying Alignment Mark
Courtesy of SUBARU OF AMERICA, INC.
Install the heat shield cover.
Install the center exhaust pipe.
Install the rear exhaust pipe and muffler.
Lower the vehicle.
Connect the ground cable to the battery.