Knock Sensor: Removal

WARNING: This page is about a different variant/trim than selected.

Disconnect the ground cable from the battery.

Fig 1: Identifying Ground Cable From Battery
Courtesy of SUBARU OF AMERICA, INC.
Remove the air intake chamber. <Ref. to REMOVAL , Air Intake Chamber .>
Disconnect the knock sensor connector.

Fig 2: Identifying Knock Sensor Connector
Courtesy of SUBARU OF AMERICA, INC.
Remove the knock sensor from cylinder block.

Fig 3: Identifying Knock Sensor From Cylinder Block
Courtesy of SUBARU OF AMERICA, INC.