LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2007 >> Outback XT Limited, Standard >> Repair and Diagnosis >> Accessories & Equipment >> Communication Devices >> LAN System (Diagnostics) >> Subaru Select Monitor >> Operation >> Clear Memory Mode

Clear Memory Mode

  1. On the «Main Menu» screen, select {2. Each System Check}.
  2. On the «System Selection Menu» display screen, select the {Integ. unit mode}.
  3. Select the [OK] after the information of body integrated unit type is displayed.
  4. On the «Integ. Unit mode failure diag» display screen, select {Clear Memory}.
    CLEAR MEMORY DISPLAY CHART

    Display Contents to be monitored
    Clear Memory? Clear function of DTC and freeze frame data
  5. When "Done" is shown on the display screen, turn the ignition switch to OFF.
    NOTE: For details concerning operation procedures, refer to the "SUBARU SELECT MONITOR OPERATION MANUAL".
scientia non olet · About LEMON Manuals