Front ABS Wheel Speed Sensor: Installation

Install in the reverse order of removal.

Tightening torque:

Sensor:

7.5 N.m (0.76 kgf-m, 5.5 ft-lb)

Bracket:

33 N.m (3.3 kgf-m, 24 ft-lb)

CAUTION: Be careful not to damage the sensor.

NOTE:

Check the identification (mark) on the harness to make sure there is no warpage. (RH: K1 (White), LH: K2 (Yellow))
Check if the harness is not pulled and does not come in contact with the suspension or body during steering wheel effort.