Impact Sensitivity Adjustment
- Connect the Subaru Select Monitor to the data link connector.
- Turn the ignition switch to ON.
- Select {Impact Sensor} from the main menu.
- Make a {Sensitivity Adjustment Mode}
- Sensitivity can be adjusted in 11 levels (0 to 10).
- Initial setting is 5.
- Smaller number means more sensitive.
- Larger number means less sensitive.
- Turn the ignition switch to OFF, and then remove the Subaru Select Monitor.NOTE:
- Set the sensor so as not to let the alarm on normal vibration (reclining to the door, hit the ball and etc.).
- Set the sensor to operate the alarm with hitting the door or window glass, etc. continuously like a mayhem by robbery.
- Ask the customer about parking situation for setting, because the alarm operate when the vibration not only the burglar but also the construction etc.