LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2007 >> Impreza WRX TR >> Repair and Diagnosis >> Suspension >> Wheel Alignment >> Front Suspension >> Front Transverse Link >> Assembly >> Rear Bushing

Rear Bushing

  1. Install the rear bushing to transverse link, and then align the aligning marks scribed on the two.
  2. Tighten the new self-locking nut.
NOTE: While holding the rear bushing so as not to change position of aligning marks, tighten the self-locking nut.

Tightening torque: 

190 N.m (19.4 kgf-m, 140 ft-lb) 

INSPECTION 

  1. Check the transverse link for wear, damage and cracks, and correct or replace if defective.
  2. Check the bushings for cracks, fatigue or damage.
  3. Check the rear bushing for oil leaks.
scientia non olet · About LEMON Manuals