LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2007 >> Impreza WRX TR >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Fuel Injection System (H4DOTC) >> Wastegate Control Solenoid Valve >> Removal

Wastegate Control Solenoid Valve: Removal

  1. Disconnect the ground cable from the battery.
    Fig 1: Disconnecting Battery Ground Cable
    G04988132Courtesy of SUBARU OF AMERICA, INC.
  2. Disconnect the engine harness connector (A) from bracket.
  3. Disconnect the connector (B) from wastegate control solenoid valve.
  4. Disconnect the connector (C) of front oxygen (A/F) sensor from bracket.
  5. Remove the bracket from vehicle body.
    Fig 2: Identifying Engine Harness Connector And Front Oxygen (A/F) Sensor Connector
    G05333606Courtesy of SUBARU OF AMERICA, INC.
  6. Disconnect pressure hose (D) from the waste-gate control solenoid valve.
    Fig 3: Identifying Pressure Hose On Waste-Gate Control Solenoid Valve
    G05333607Courtesy of SUBARU OF AMERICA, INC.
  7. Remove the wastegate control solenoid valve from the bracket
scientia non olet · About LEMON Manuals