Front Crossmember: Installation

Install in the reverse order of removal.
NOTE: Always tighten the bushing when tires are in full contact with the ground and vehicle is curb weight.

Tightening torque:

Transverse link bushing to crossmember:

125 N.m (12.7 kgf-m, 92 ft-lb)

Stabilizer to bushing:

25 N.m (2.5 kgf-m, 18.1 ft-lb)

Tie-rod end to housing:

27.0 N.m (2.75 kgf-m, 19.9 ft-lb)

Front cushion rubber to crossmember:

85 N.m (8.7 kgf-m, 62.7 ft-lb)

Universal joint to pinion shaft:

24 N.m (2.4 kgf-m, 17.4 ft-lb)

Crossmember to body:

105 N.m (10.7 kgf-m, 77 ft-lb)
Purge air from the power steering system.
Check the wheel alignment and adjust if necessary.