LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2007 >> Impreza WRX STi >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls (Diagnostics) (STI) >> Drive Cycle >> Procedure >> Drive Cycle E

Drive Cycle E

  1. Make sure that the battery voltage is 10.9 V or more.
  2. Perform the Clear Memory Mode. <Ref. to CLEAR MEMORY MODE .>
  3. Drive the vehicle for the distance equal to the fuel of 30 0 (7.9 US gal, 6.6 lmp gal).
NOTE:
  • It is acceptable to drive the vehicle intermittently.
  • Do not disconnect the terminal of battery during diagnosis. (Data will be cleared by disconnecting the battery terminals.)
DTC CHART

DTC Item Condition
P0461 Fuel Level Sensor "A" Circuit Range/Performance -
scientia non olet · About LEMON Manuals