RH Side

Release the fuel pressure. <Ref. to RELEASING OF FUEL PRESSURE , PROCEDURE, FUEL .>
Disconnect the ground cable from the battery.

Fig 1: Disconnecting Battery Ground Cable
Courtesy of SUBARU OF AMERICA, INC.
Open the fuel filler flap lid, and remove the fuel filler cap.
Remove the air cleaner upper cover and air intake boot. <Ref. to REMOVAL , Air Cleaner Case .>
Remove the air cleaner element.
Remove the coolant filler tank. <Ref. to REMOVAL , Coolant Filler Tank .>
Remove the power steering pump.
1. Remove the front V-belt. <Ref. to REMOVAL , V-belt .>
2. Disconnect the power steering switch connector.
  
  Fig 2: Locating Connector For Power Steering Pump Switch
  Courtesy of SUBARU OF AMERICA, INC.
3. Remove the bolts which install the power steering pipe bracket to the intake manifold.
  NOTE: Do not disconnect the power steering hose.
  
  Fig 3: Locating Intake Manifold Pipe
  Courtesy of SUBARU OF AMERICA, INC.
4. Remove the bolts, which install power steering pump bracket.
  
  Fig 4: Identifying Power Steering Pump Bracket Bolts
  Courtesy of SUBARU OF AMERICA, INC.
5. Remove the reservoir tank from the bracket by pulling it upward.
  
  Fig 5: Locating Power Steering Tank
  Courtesy of SUBARU OF AMERICA, INC.
6. Place the power steering pump on the right side wheel apron.
Remove the fuel pipe protector RH.
- Except for STI model
  
  Fig 7: Locating Fuel Pipe Protector With Bolts (RH)
  Courtesy of SUBARU OF AMERICA, INC.
- STI model
Disconnect the connector from fuel injector.

Fig 9: Identifying Fuel Injector Connectors
Courtesy of SUBARU OF AMERICA, INC.
Remove the bolt which holds the injector pipe to the intake manifold.

Fig 10: Locating Bolt Holding Fuel Injector Pipe Onto Intake Manifold (RH)
Courtesy of SUBARU OF AMERICA, INC.

Fig 11: Locating Bolt Holding Fuel Injector Pipe Onto Intake Manifold (RH)
Courtesy of SUBARU OF AMERICA, INC.
Remove the fuel injector while lifting up the fuel injector pipe.

Fig 12: Holding Fuel Injector

Courtesy of SUBARU OF AMERICA, INC.