LH Side

Release the fuel pressure. <Ref. to RELEASING OF FUEL PRESSURE , PROCEDURE, FUEL .>
Disconnect the ground cable from the battery.

Fig 1: Disconnecting Battery Ground Cable
Courtesy of SUBARU OF AMERICA, INC.
Open the fuel filler flap lid, and remove the fuel filler cap.
Remove the intake manifold. <Ref. to REMOVAL , Intake Manifold .>
Remove the fuel pipe protector LH.
- Except for STI model
  
  Fig 2: Locating Fuel Pipe Protector With Bolts (LH)
  Courtesy of SUBARU OF AMERICA, INC.
- STI model
Disconnect the connector from fuel injector.
Remove the purge control solenoid valve. <Ref. to REMOVAL , Purge Control Solenoid Valve .>
Remove the two bolts which hold fuel pipes on the left side of intake manifold.

Fig 4: Identifying Bolts Holding Fuel Pipes On Left Side Of Intake Manifold
Courtesy of SUBARU OF AMERICA, INC.
Remove the bolt which holds fuel injector pipe onto intake manifold.

Fig 5: Locating Bolt Holding Fuel Injector Pipe Onto Intake Manifold (LH)
Courtesy of SUBARU OF AMERICA, INC.

Fig 6: Locating Bolt Holding Fuel Injector Pipe Onto Intake Manifold (LH)
Courtesy of SUBARU OF AMERICA, INC.
Remove the fuel injector while lifting up the fuel injector pipe.