LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2007 >> Impreza WRX STi Limited >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Fuel Injection System (H4DOTC) >> Camshaft Position Sensor >> Removal

Camshaft Position Sensor: Removal

  1. Disconnect the ground cable from the battery.
    Fig 1: Disconnecting Battery Ground Cable
    G04988132Courtesy of SUBARU OF AMERICA, INC.
  2. Disconnect the connector from camshaft position sensor RH.
  3. Remove the camshaft position sensor RH from the cylinder head rear.
    Fig 2: Locating Camshaft Position Sensor LH
    G04999382Courtesy of SUBARU OF AMERICA, INC.
  4. Remove the cam shaft position sensor LH in the same way as RH.
scientia non olet · About LEMON Manuals