LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2007 >> Impreza Outback Sport, Standard >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls (Diagnostics) (H4SO) >> Drive Cycle >> Procedure >> Preparation For Drive Cycle

Preparation For Drive Cycle

  1. Check that the battery voltage is 12 V or more and fuel remains approx. half [20 - 40 l  (5.3 - 10.6 US gal, 4.4 - 8.8 lmp gal)].
  2. After clearing the memory, check for any remaining unresolved trouble data. <Ref. to CLEAR MEMORY MODE .>
  3. Disconnect the test mode connector.
NOTE:
  • Perform the diagnosis after warming up the engine except when the engine coolant temperature at starting is specified.
  • Perform the diagnosis twice when the DTC is marked with *. After the completion of the first diagnostic, stop the engine and perform the second diagnostic on same condition.
scientia non olet · About LEMON Manuals