RH Side

Release the fuel pressure. <Ref. to RELEASING OF FUEL PRESSURE , PROCEDURE, FUEL .>
Disconnect the ground cable from the battery.

Fig 1: Connecting Battery Ground Cable
Courtesy of SUBARU OF AMERICA, INC.
Open the fuel filler flap lid, and remove the fuel filler cap.
Remove the air intake duct and air cleaner case. <Ref. to REMOVAL , Air Intake Duct .> <Ref. to REMOVAL , Air Cleaner Case .>
Remove the power steering pump and power steering reservoir tank.
1. Remove the front V-belt. <Ref. to REMOVAL , V-belt .>
2. Remove the bolts which hold the power steering pipes onto the intake manifold protector RH.
  NOTE: Do not disconnect the power steering hose.
  
  Fig 2: Locating Heater Inlet And Outlet Hoses Bracket With Bolts
  Courtesy of SUBARU OF AMERICA, INC.
3. Remove the bolts which install the power steering pump to the bracket.
  
  Fig 3: Locating Power Steering Pump Bracket Bolts
  Courtesy of SUBARU OF AMERICA, INC.
4. Disconnect the power steering pump switch connector (A).
  
  Fig 4: Identifying Power Steering Pump Switch Connector
  Courtesy of SUBARU OF AMERICA, INC.
5. Remove the power steering reservoir tank from the bracket by pulling it upward.
  
  Fig 5: Identifying Power Steering Tank
  Courtesy of SUBARU OF AMERICA, INC.
6. Place the power steering pump and tank on the right side wheel apron.
Remove the spark plug cords from spark plugs (#1 and #3 cylinders).
Remove the fuel pipe protector RH.

Fig 7: Locating Fuel Pipe Protector RH
Courtesy of SUBARU OF AMERICA, INC.
Disconnect the connectors (A) from fuel injector.
Remove the harness band (B) which holds the engine harness to fuel injector pipe.

Fig 8: Locating Harness Band
Courtesy of SUBARU OF AMERICA, INC.
Remove the bolt which holds fuel injector pipe onto intake manifold.

Fig 9: Locating Fuel Injector Pipe Bolts - RH Side
Courtesy of SUBARU OF AMERICA, INC.
Remove the fuel injector while lifting up the fuel injector pipe.