Fuel Filler Pipe: Removal

WARNING: Place "NO OPEN FLAMES" signs near the working area.

CAUTION: Be careful not to spill fuel.

Set the vehicle on a lift.
Disconnect the ground cable from the battery.

Fig 1: Connecting Battery Ground Cable
Courtesy of SUBARU OF AMERICA, INC.
Open the fuel filler flap lid, and remove the filler cap.
Remove the screws which secure gasket.

Fig 2: Locating Fuel Filler Flap Lid Screws
Courtesy of SUBARU OF AMERICA, INC.
Remove the rear wheel RH.
Lift up the vehicle.
Drain fuel from fuel tank. <Ref. to DRAINING FUEL , PROCEDURE, FUEL .>
Remove the fuel filler pipe protector.

Fig 3: Locating Bolts On Fuel Filler Pipe Protector
Courtesy of SUBARU OF AMERICA, INC.
Disconnect the evaporation hose from the clip of fuel filler pipe.

Fig 4: Locating Bolts
Courtesy of SUBARU OF AMERICA, INC.
Disconnect the evaporation hose from the fuel pipe.

Fig 5: Identifying Evaporation Hose
Courtesy of SUBARU OF AMERICA, INC.
Remove the bolts which hold fuel filler pipe bracket on the body.

Fig 6: Identifying Fuel Filler Pipe Bracket Bolts
Courtesy of SUBARU OF AMERICA, INC.
Loosen the clamp and disconnect the fuel filler hose (A) from the fuel filler pipe.
Move the clip and disconnect the evaporation hose (B).

Fig 7: Identifying Evaporation Hose And Fuel Filler Hose
Courtesy of SUBARU OF AMERICA, INC.
Remove the fuel filler pipe to the underside of the vehicle.
Remove the evaporation pipe together with the clip from the vehicle body.

Fig 8: Identifying Evaporation Pipe

Courtesy of SUBARU OF AMERICA, INC.