LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2007 >> Impreza Outback Sport, Standard >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Fuel Injection System (H4SO) >> Crankshaft Position Sensor >> Removal

Crankshaft Position Sensor: Removal

  1. Disconnect the ground cable from the battery.
    Fig 1: Connecting Battery Ground Cable
    G04988132Courtesy of SUBARU OF AMERICA, INC.
  2. Remove the generator. <Ref. to REMOVAL , Generator .>
  3. Remove the bolt which installs crankshaft position sensor to cylinder block.
    Fig 2: Identifying Crankshaft Position Sensor
    G04997337Courtesy of SUBARU OF AMERICA, INC.
  4. Remove the crankshaft position sensor, and then disconnect the connector from it.
    Fig 3: Disconnecting Connector
    G04997386Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals