LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2007 >> Impreza Outback Sport, Standard >> Repair and Diagnosis >> Body & Frame >> Windows >> Glass/Window/Mirrors >> Windshield Glass >> Removal >> When Using Piano Wire

When Using Piano Wire

  1. Disconnect the wiper deicer connector. (Model with wiper deicer)
  2. Remove the cowl panel. <Ref. to REMOVAL , Cowl Panel.>
  3. Remove the glass molding.
  4. Tape the body side of the circumference of windshield glass for protection.
  5. Make a hole in the adhesive part using drill or knife.
  6. Pass the piano wire through the hole, and attach both the wire ends securely to pieces of wood.
    Fig 1: Passing Piano Wire Through Hole
    G05004259Courtesy of SUBARU OF AMERICA, INC.
  7. Pull the wire ends alternately to cut off the adhesive part.
CAUTION:
  • Do not tightly pull the piano wire against the windshield glass edge.
  • Be careful not to damage interior and exterior parts.
  • Do not cross piano wires. Otherwise they may be cut.
  • When removal is made with area close to instrument panel, place a protection plate over it. Pay particular attention to the removal.
scientia non olet · About LEMON Manuals