Outer Mirror: Replacement
- Remove the outer mirror assembly. <Ref. to REMOVAL , Outer Mirror Assembly.>
- Warm the area around the mirror holder (A) with a hair drier until the edges of the mirror holder become soft. (About 2 or 3 minutes with a 1,000 W drier)
- Use a flat tip screwdriver without sharp edges to lift the mirror out of the mirror holder (A) to remove the mirror.
- Disconnect the mirror heater connector. (Model with mirror heater)
- Warm the area around the mirror holder with a hair drier until the edges of the mirror holder become soft. (About 2 or 3 minutes with a 1,000 W drier)
- Connect the mirror heater connector. (Model with mirror heater)
- Remove the backing of the new double-stick tape, and push the mirror in to install it.
NOTE:
If the mirror holder is not warmed sufficiently, the mirror holder edges may be damaged or the mirror cracked.