LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2007 >> Impreza Outback Sport, Automatic >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Security And Locks >> Keyless Entry System >> Inspection >> Check Buzzer Sound Setting

Check Buzzer Sound Setting

CHECK STEP FOR BUZZER SOUND SETTING

Step Check Yes No
1 CHECK BUZZER SOUND SETTING. 
  1. Check the current setting for the buzzer.
  2. Remove the key from ignition switch.
  3. Close all the doors and the rear gate.
  4. Press the LOCK/ARM or UNLOCK/DISARM button.
 Does the buzzer sound? The buzzer function is normal. Go to step 2  .
2 CHECK BUZZER SOUND SETTING. 
  1. Open the driver's side door and pull the key out from the ignition switch.
  2. With the vehicle side manual UNLOCK switch ON, insert the key in the ignition switch.
  3. Within 10 seconds from 2), repeatedly pull out and insert the key 5 times.
  4. Open and close the door within 5 seconds from the fifth time in 3).
  5. The answer back buzzer setting is switched (ON ↔ OFF) and the hazard light flashes 3 times.
NOTE: If the door is not opened and closed within 10 seconds, the hazard light will flash once. In this case, start over from the beginning. 6) Press the LOCK/ARM or UNLOCK/DISARM button.
 Does the buzzer sound? The buzzer function is normal. Check the function of the transmitter. <Ref. to CHECK KEYLESS TRANSMITTER BATTERY AND FUNCTION , INSPECTION, Keyless Entry System .>
scientia non olet · About LEMON Manuals