Security System On/Off Setting
- Close all doors, trunk lid and rear gate, and sit down on the driver seat. Press the UNLOCK button of the keyless transmitter.
- Turn the ignition switch to ON.
- At the same time as pushing the UNLOCK side of the central door lock switch, open the driver's side door, and maintain this condition for 10 seconds.
- The security system setting is switched (ON ↔ OFF) and the horn sounds.
SECURITY SYSTEM ON/OFF SETTING
| Setting | Notice |
|---|---|
| OFF → ON | The horn sounds once. |
| ON → OFF | The horn sounds twice. |
NOTE:
For information on setting ON/OFF of the security system through the Subaru Select Monitor, refer to the following:<Ref. to
PROCEDURE , Security Control Unit .>