Electrical Specification
WARNING: This page is about a different car, the 2006 Subaru Impreza. However, it is still accessible from the selected car via links, so may be relevant.
ELECTRICAL SPECIFICATION
| Content | Terminal No. | Measuring condition and I/O signal (ignition switch ON and engine idling Except cruise set light) | |
|---|---|---|---|
| Clutch switch | Except STi model: C25 STi model: A1 |
|
|
| Cruise set indicator light | Except STi model: B3 STi model: A16 | (Press the main switch and drive the vehicle at 40 km/h (25 MPH) or more.)
|
|
| Cruise indicator light | Except STi model: B6 STi model: A15 |
|
|
| Main power supply | VB (CONTROL 1) VB (CONTROL 2) |
Except STi model: B5 STi model: B19 | Battery voltage is present. |
| Vehicle speed signal | Non-turbo model: C12 Turbo model: C13 STi model: B26 | Lift-up the vehicle until all four wheels are raised off the ground, and then rotate any wheel manually. Approx. "5 V" and "0 V" pulse signals are alternately input to ECM. | |
| SET/COAST switch | Except STi model: B24 STi model: C11 |
|
|
| RES/ACC switch | Except STi model: B13 STi model: C10 |
|
|
| Brake switch 1 (Brake switch) | Except STi model: B20 STi model: C9 |
|
|
| Brake switch 2 (Stop light switch) | Except STi model: B28 STi model: C8 |
|
|
| Cruise control main switch | Except STi model: B12 STi model: C7 |
|
|
| Ground | GND (CONTROL 1) | Except STi model: C15 STi model: D2 | - |
| GND (CONTROL 2) | Except STi model: A5 STi model: D1 | - | |
| Ignition switch | Non-turbo model: B27 Turbo model: B19 STi model: D14 |
|
|
| Neutral position switch (MT model) | Except STi model: C31 STi model: D9 |
|
|
| Neutral signal (AT model) | C31 |
|
|