Electrical Specification
WARNING: This page is about a different car, the 2006 Subaru Impreza. However, it is still accessible from the selected car via links, so may be relevant.
SECURITY SYSTEM CONNECTOR TERMINALS REFERENCE
| Content | Terminal No. | Measuring condition |
|---|---|---|
| Power supply (Backup) | 2 | Battery voltage is constantly present. |
| Door switch | 6 (INPUT) | 0 V is present when any door is open. |
| Trunk room light switch (Sedan model) | 7 (INPUT) | 0 V is present when trunk lid or rear gate is open. |
| Rear gate latch switch (Wagon model) | ||
| Impact sensor | 8 | - |
| Ignition switch (ON) | 10 (INPUT) | Battery voltage is present when ignition switch is turned to ON. |
| Security horn relay | 11 (INPUT) | Battery voltage is present when activating the alarm operation. |
| Interrupt relay | 12 (OUTPUT) | Battery voltage is present when activating the alarm operation. |
| Ground | 14 | 0 V is constantly present. |
| Impact sensor | 15 | - |
| Security indicator light | 15 (OUTPUT) | 0 V is present when activating the alarm operation. |
| Impact sensor | 17 | - |