LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2007 >> Impreza Base, 4D Sedan, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 30 (Security And Locks) >> Keyless Entry System >> Inspection >> Check Room Light Operation

Check Room Light Operation

WARNING: This page is about a different car, the 2006 Subaru Impreza. However, it is still accessible from the selected car via links, so may be relevant.
CHECK ROOM LIGHT OPERATION

Step Check Yes No
1 CHECK ROOM LIGHT OPERATION. 
Make sure the room light illuminates when the room light switch is turned ON.		 Does the room light illuminate? Go to step 2.  Check the room light circuit.
2 CHECK HARNESS BETWEEN ROOM LIGHT AND BODY INTEGRATED MODULE. 
  1. Disconnect the body integrated module harness connector and room light harness connector.
  2. Measure the resistance between the body integrated module harness connector terminal and the room light harness connector terminal.

    Connector & terminal 

    (B280) No. 5 - (R52) No. 2: 

 Is the resistance less than 10 Ω? The room light operation circuit is OK. Check the harness for open circuits and/or shorts between the body integrated module and room light.
scientia non olet · About LEMON Manuals