Interrupt Relay: Inspection
WARNING: This page is about a different car, the 2006 Subaru Impreza. However, it is still accessible from the selected car via links, so may be relevant.
Measure the interrupt relay resistance between terminals (indicated in the table below) when connecting terminal No. 3 to battery positive terminal and terminal No. 1 to battery ground terminal.
RESISTANCE REFERENCE
| Current | Terminal No. | Standard value |
|---|---|---|
| Flow | 2 and 5 | More than 1 MΩ |
| No flow | Less than 1 Ω | |
| Flow | 4 and 5 | Less than 1 Ω |
| No flow | More than 1 MΩ |
If NG, replace the interrupt relay.
CAUTION:
Do not connect the terminals to battery positive terminal and ground terminal incorrectly. If this happens, replace the interrupt relay.