Immobilizer Control Unit: Removal
WARNING: This page is about a different car, the 2006 Subaru Impreza. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
- Prepare the security ID plate.
- Prepare all registered immobilizer keys for the model with immobilizer.
- Make a registration of immobilizer when replacing the immobilizer control unit. New immobilizer key is required for registration. For detailed operation procedure, refer to "Immobilizer Registration Manual".
- If the keys are added without replacing the immobilizer control unit, maximum 4 keys can be registered including new keys.
- Disconnect the ground cable from battery.
- Remove the instrument panel lower cover. < Ref. to REMOVAL , Instrument Panel Assembly. >
- Disconnect the connector from immobilizer control unit.
- Remove the immobilizer control unit.