LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2007 >> Impreza Base, 4D Sedan, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 30 (Security And Locks) >> Ignition Key Lock >> Replacement

Ignition Key Lock: Replacement

WARNING: This page is about a different car, the 2006 Subaru Impreza. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the ground cable from battery.
  2. Remove the steering column. < Ref. to REMOVAL , Tilt Steering Column. >
  3. Secure the steering column in a vise. Remove the bolt with a drill.
    Fig 1: Removing Steering Column Bolt
    G05004398
  4. Remove the ignition key lock.
  5. Use a new torn bolt. Tighten the torn bolt to end of thread.
    Fig 2: Tightening Torn Bolt To End Thread
    G05004399
scientia non olet · About LEMON Manuals