LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2007 >> Impreza Base, 4D Sedan, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 30 (Security And Locks) >> Ignition Key Lock >> Inspection

Ignition Key Lock: Inspection

WARNING: This page is about a different car, the 2006 Subaru Impreza. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the instrument panel lower cover.
  2. Remove the lower column cover.
  3. Unfasten the hold-down clip which secures harness and disconnect the connector of ignition switch from body harness.
  4. Turn the ignition key plate to each position and check the continuity between terminals of ignition connector.
    SWITCH POSITION CHART

    Switch position Terminal No. Standard
    LOCK - -
    ACC No. 1 and No. 2 Less than 1 Ω
    ON No. 1 and No. 2 No. 1 and No. 4 No. 2 and No. 4 Less than 1 Ω
    ST No. 1 and No. 3 No. 1 and No. 4 No. 3 and No. 4 Less than 1 Ω

    If NG, replace the ignition switch.

scientia non olet · About LEMON Manuals