LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2007 >> Impreza Base, 4D Sedan, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 162 (A/T Control Systems) >> Select Lever >> Assembly

Select Lever: Assembly

WARNING: This page is about a different car, the 2007 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.
  1. Clean all the parts before assembly.
  2. Apply grease [SUNLIGHT 2 (Part No. 003602010) or equivalent] to each part. <Ref. to AT SELECT LEVER  Component, General Description. >
    CAUTION: Apply grease [SUNCALL GLO-244] to the axle of lock plate.
  3. Assemble in the reverse order of disassembly.
  4. After completion of fitting, transfer the select lever to the "1" range from "P" range, then check whether the select indicator and select lever match, and whether the pointer and position mark match and check the operating force.
scientia non olet · About LEMON Manuals