Stop Light and Brake Switch: Inspection
WARNING: This page is about a different car, the 2006 Subaru Impreza. However, it is still accessible from the selected car via links, so may be relevant.
Measure the brake switch (A) and stop light switch (B) resistance.
SWITCH POSITION
| Switch | Pedal | Terminal No. | Standard |
|---|---|---|---|
| Brake | Released | 1 and 4 | Less than 1 Ω |
| Depressed | 1 and 4 | More than 1 MΩ | |
| Stop light | Released | 2 and 3 | More than 1 MΩ |
| Depressed | 2 and 3 | Less than 1 Ω |
If NG, replace the stop light and brake switch.