LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2007 >> Forester XT Limited, Automatic >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls (Diagnostics) (H4DOTC) >> Drive Cycle >> Procedure >> Drive Cycle E

Drive Cycle E

  1. Make sure that the battery voltage is 10.9 V or more.
  2. Perform the Clear Memory Mode. <Ref. to CLEAR MEMORY MODE . >
  3. Drive for approximately 30 (7.9 US gal, 6.6 Imp gal) of fuel.
    NOTE:
    • It is acceptable to drive the vehicle intermittently.
    • Do not disconnect the terminal of battery during diagnosis. (Data will be cleared when disconnecting the battery terminals.)
    DTC

    DTC Item Condition
    P0461 Fuel Level Sensor Circuit Range/Performance -