LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2007 >> Forester X, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 2 (Fuel Injection - Fuel Systems (H4SO)) >> Fuel Sub Level Sensor >> Installation

Fuel Sub Level Sensor: Installation

WARNING: This page is about a different car, the 2005 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.

Install in the reverse order of removal.

NOTE: Use a new gasket.
  1. Ensure the sealing portion is free from fuel or foreign particles before installation.
  2. Tighten the nuts and bolts to specified torque in the order as shown in the figure.

    Tightening torque: 

    4.4 N.m (0.45 kgf-m, 3.3 ft-lb) 

    Fig 1: Tightening Nuts And Bolts
    G03805353Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals