LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2007 >> Forester X, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 12 (Engine Controls - Engine (Diagnostics) (H4SO)) >> Clear Memory Mode >> Operation >> SUBARU Select Monitor (OBD Mode)

SUBARU Select Monitor (OBD Mode)

WARNING: This page is about a different car, the 2005 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.
  1. On << Main Menu >> display screen, select the {2. Each System Check} and press the [YES] key.
  2. On << System Selection Menu >> display screen, select the {Engine Control System} and press the [YES] key.
  3. Press the [YES] key after the information of engine type is displayed.
  4. On << Engine Diagnosis >> display screen, select the {OBD System} and press the [YES] key.
  5. On << OBD Menu >> display screen, select the {4. Diagnosis Code(s) Cleared} and press the [YES] key.
  6. When the 'Clear Diagnostic Code?' is shown on the display screen, press the [YES] key.
  7. Turn the Subaru Select Monitor and ignition switch to OFF.
    NOTE: For detailed operation procedure, refer to SUBARU SELECT MONITOR OPERATION MANUAL.
scientia non olet · About LEMON Manuals