LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2007 >> Forester X, Standard >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls (Diagnostics) (H4SO) >> Drive Cycle >> Procedure >> Preparation For Drive Cycle

Preparation For Drive Cycle

  1. Check battery voltage is more than 12 V and fuel remains half [20 - 40 l  (5.3 - 10.6 US gal, 4.4 - 8.8 Imp gal)].
  2. After clearing the memory, check for any remaining unresolved trouble data. <Ref. to CLEAR MEMORY MODE . >
  3. Disconnect the test mode connector.
    NOTE:
    • Except for the water temperature specified items at starting, be sure to carry out the diagnosis after the engine is warmed up.
    • For the DTC which has * mark on it, carry out the diagnosis twice. After finishing first diagnosis, stop the engine, and do the second diagnosis at the same condition.
scientia non olet · About LEMON Manuals