LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2007 >> Forester X, Automatic >> Repair and Diagnosis >> Restraints >> Air Bag, SRS >> Airbag System >> Airbag Control Module >> Removal

Airbag Control Module: Removal

CAUTION:
  • Do not disassemble the airbag control module.
  • If the airbag control module is deformed or if the damage from water is suspected, replace the airbag control module with a new part.
  • Do not drop the airbag control module.
  • After removal, keep the airbag control module on a dry, clean surface away from moisture, heat and dust.
  1. Turn the ignition switch to OFF.
  2. Disconnect the ground cable from battery and wait for at least 20 seconds before starting work.
  3. Remove the console cover. <Ref. REMOVAL , Console Box. >
  4. Remove the center console panel. <Ref. REMOVAL , Instrument Panel Assembly. >
  5. Disconnect the connector from airbag control module.
  6. Remove the four bolts and remove the airbag control module.
    Fig 1: Identifying Bolts And Airbag Control Module
    G04995086Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals