LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2007 >> Forester X, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 79 (Security And Locks) >> Impact Sensor >> Removal

Impact Sensor: Removal

WARNING: This page is about a different car, the 2006 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: The impact sensor is a dealer OP.
  1. Remove the key from ignition switch.
  2. Close all doors and rear gate.
  3. Press the UNLOCK button of the keyless transmitter.
  4. Change the setting of impact sensor using Subaru Select Monitor.
  5. Disconnect the ground cable from battery.
  6. Remove the impact sensor.
scientia non olet · About LEMON Manuals