Master Cylinder: Installation
WARNING: This page is about a different car, the 2006 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.
- Install the master cylinder to the body, and attach the clutch pipe to the master cylinder.NOTE: Check that the pipe is routed properly.
Tightening torque:
Clutch pipe 15 N.m (1.5 kgf-m, 10.8 ft-lb)
Master cylinder 18 N.m (1.8 kgf-m, 13.0 ft-lb)
- Apply grease to the clevis pin.
- Connect the push rod of master cylinder to clutch pedal, and install the new clevis pin and snap pin.
- After bleeding air from system, ensure that the clutch operates properly.
<Ref. to CLUTCH FLUID AIR BLEEDING . >
- Install the air intake chamber. (Non-turbo model)
<Ref. to INSTALLATION Air Intake Chamber. >
- Install the intercooler. (Turbo model)
<Ref. to INSTALLATION Intercooler. >